Find a Service Center
- 1.625 in Shaft Diameter
- 2.25 in Housing Bore
- 0.375 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Design | CRW1 |
| Operating Temperature [Max] | 302 °F |
| Temperature Range [Max] | 300 °F |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Bore Sealant | Bore Tite |
| Shaft Dia. | 1.625 in |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 2.25 in |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Case Design | Metal Case |
| Overall Width | 0.375 in |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Weight | 0.091 LB |
| EAN or UPC | 85311016599 |
