Find a Service Center
- 1.625 in Shaft Diameter
- 2.374 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Construction | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Temperature Range [Max] | 250 °F |
| Housing Bore Dia. | 2.374 in |
| Shaft Dia. | 1.625 in |
| Spring Material | Carbon Steel Garter |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Min] | -40 °F |
| Solid | Yes |
| Overall Width | 0.25 in |
| Design | CRW1 |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Lip Style | Internal |
| Weight | 0.112 LB |
| EAN or UPC | 85311183000 |
