17381

Fluoro Rubber Dual Lip Shaft Seal

Item #100747076

Auto Replenish

each One-time purchase

Alternate Products

Timken Co. 472164V

Dual Lip with One Spring

Item #100754476

each

Compare

Product Details

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

Specifications

Cover/Compensation Ring/Plate Required	No
Lip Style	Internal
Pressure	10 psi
Seal Application	Dirt Exclusion and Lubricant Retention
Seal Design	SKF Wave
Surface Speed [Nom]	3,600 ft/min
Operating Temperature [Max]	390 °F
Spring Type	Garter
Case Design	Metal Case
Spring Material	Carbon Steel
Solid	Yes
Inch/Metric	Inch
Shaft Dia.	1.75 in
Case Construction	Steel Case w/o Inner Case
Lip Type	Dual Lip
Speed	0.07 ft/min
Operating Temperature [Min]	-5 °F
Design	CRWA1
Misalignment & Runout (In. @ Feet Per Minute)	0.015@1000, 0.010@3600
Lubricant	Oil or Grease
Overall Width	0.313 in
Construction	CRWA1
Seal Type	Oil
Temperature Range [Max]	400 °F
Temperature Range [Min]	-40 °F
Installation	Housing Press Fit
Case Material	Steel
Bore Sealant	Bore Tite
Lip Material	Fluorocarbon Rubber (FKM)
Housing Bore Dia.	2.502 in
Weight	0.086 LB
EAN or UPC	85311018487