Find a Service Center
- 1.75 in Shaft Diameter
- 2.997 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Construction | CRW1 |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -65 °F |
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Shaft Dia. | 1.75 in |
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Overall Width | 0.313 in |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 2.997 in |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Solid | Yes |
| Spring Type | Garter |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.106 LB |
| EAN or UPC | 85311018890 |
