Find a Service Center
Alternate Products
- 1.938 in Shaft Diameter
- 2.997 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Housing Bore Dia. | 2.997 in |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 2,285 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Shaft Dia. | 1.938 in |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case |
| Design | CRW1 |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.313 in |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Weight | 0.102 LB |
| EAN or UPC | 85311021487 |
