Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 2 in |
| Surface Speed [Nom] | 2,358 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Solid | Yes |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Design | CRW1 |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Spring Type | Garter |
| Spring Material | Carbon Steel |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Lip Type | Single Lip |
| Construction | CRW1 |
| Overall Width | 0.375 in |
| Housing Bore Dia. | 3.125 in |
| Weight | 0.145 LB |
| EAN or UPC | 85311022712 |
