Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3.15 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 3.15 in |
| Seal Type | Oil |
| Design | CRW1 |
| Solid | Yes |
| Shaft Dia. | 2 in |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Construction | CRW1 |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.375 in |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 2,358 ft/min |
| Case Material | Steel |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Spring Type | Garter |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.205 LB |
| EAN or UPC | 85311022736 |
