Find a Service Center
- 2.208 in Shaft Diameter
- 2.913 in Housing Bore Diameter
- 0.394 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Design | HMSA57 |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Speed | 0.05 ft/min |
| Installation | Housing Press Fit |
| Overall Width | 10 mm |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Construction | HMSA55 |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 2 in, 74 mm |
| Inch/Metric | Metric |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Dual Lip |
| Case Construction | Steel Case w/o Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Lip Style | Internal / External |
| Seal Design | Assembled Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | Light Dirt Exclusion |
| Pressure | 7 psi |
| Case Design | Metal Case |
| Shaft Dia. | 2 in, 56 mm |
| Temperature Range [Max] | 250 °F |
| Weight | 0.164 LB |
| EAN or UPC | 85311156387 |
