24932

Nitrile Rubber Dual Lip Shaft Seal

Item #100747490

Auto Replenish

each One-time purchase

Alternate Products

Timken Co. 410496

Dual Lip w/One Spring Shaft Seal

Item #100753625

each

Compare

Product Details

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWHA1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

Specifications

Inch/Metric	Inch
Speed	0.07 ft/min
Bore Sealant	Bore Tite
Spring Material	Carbon Steel
Design	CRWHA1
Case Design	Metal Case, Inner Case
Surface Speed [Nom]	3,600 ft/min
Temperature Range [Max]	225 °F
Operating Temperature [Min]	-40 °F
Seal Type	Oil
Installation	Housing Press Fit
Pressure	10 psi
Lip Style	Internal
Lip Material	Nitrile Rubber (NBR)
Temperature Range [Min]	-65 °F
Seal Design	SKF Wave
Lip Type	Dual Lip
Seal Application	Medium Dirt Exclusion
Overall Width	0.438 in
Misalignment & Runout (In. @ Feet Per Minute)	0.015@1000, 0.010@3600
Construction	CRWHA1
Case Material	Steel
Housing Bore Dia.	3.35 in
Solid	Yes
Lubricant	Oil or Grease
Cover/Compensation Ring/Plate Required	No
Spring Type	Garter
Case Construction	Steel Case w/Inner Case
Shaft Dia.	2.5 in
Operating Temperature [Max]	210 °F
Weight	0.171 LB
EAN or UPC	85311026949
NSN Number	5330-01-128-5176