26190

Metric Radial Shaft Seal

Item #100747551

Auto Replenish

each One-time purchase

Alternate Products

Timken Co. 415483

Dual Lip with One Spring

Item #100753748

each

Compare

Product Details

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWHA1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

Specifications

Overall Width	0.438 in
Lip Style	Internal
Spring Material	Carbon Steel
Lubricant	Oil or Grease
Operating Temperature [Max]	210 °F
Seal Design	SKF Wave
Case Design	Metal Case, Inner Case
Seal Type	Oil
Inch/Metric	Inch
Bore Sealant	Bore Tite
Lip Material	Nitrile Rubber (NBR)
Installation	Housing Press Fit
Spring Type	Garter
Case Material	Steel
Misalignment & Runout (In. @ Feet Per Minute)	0.015@1000, 0.010@3600
Operating Temperature [Min]	-40 °F
Speed	0.07 ft/min
Design	CRWHA1
Solid	Yes
Pressure	10 psi
Temperature Range [Max]	225 °F
Lip Type	Dual Lip
Case Construction	Steel Case w/Inner Case
Shaft Dia.	2.625 in
Temperature Range [Min]	-65 °F
Seal Application	Medium Dirt Exclusion
Surface Speed [Nom]	3,600 ft/min
Construction	CRWHA1
Housing Bore Dia.	3.5 in
Cover/Compensation Ring/Plate Required	No
Weight	0.18 LB
EAN or UPC	85311027755
NSN Number	5330-00-731-8702