Find a Service Center
- Radial Shaft Seal
- 34 mm Shaft Diameter
- 46 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Overall Width | 8 mm |
| Construction | HMSA7 |
| Housing Bore Dia. | 46 mm |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Dual Lip w/One Spring |
| Seal Type | Grease |
| Inch/Metric | Metric |
| Seal Design | Standard |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Shaft Dia. | 34 mm |
| Seal Application | Light Dirt Exclusion |
| Case Construction | Rubber Covered Steel Case |
| Temperature Range [Max] | 250 °F |
| Weight | 0.068 LB |
| EAN or UPC | 85311229432 |
