Skip to content Skip to navigation menu
Polyacrylate Elastomer Dual Lip Shaft Seal

35040

Polyacrylate Elastomer Dual Lip Shaft Seal
Item #100747836
  • 3.5 in Shaft Diameter
  • 4.751 in Housing Bore
  • 0.375 in Overall Width
  • Polyacrylate Elastomer (ACM) Lip Material
  • SKF Wave Seal
Polyacrylate Elastomer Dual Lip Shaft Seal
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3.5 in Shaft Diameter
  • 4.751 in Housing Bore
  • 0.375 in Overall Width
  • Polyacrylate Elastomer (ACM) Lip Material
  • SKF Wave Seal

description

  • Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

applications

  • Engines
  • Drive axles
  • Transmissions
  • Pumps
  • Electric motors
  • Speed reducers

features

  • For oil or grease
  • With garter spring
  • WAVE lip creates higher pumping rate
  • WAVE lip has less friction between shaft and lip
  • WAVE lip has a lower temperature at the contact point
Shaft Dia. 3.5 in
Seal Type Oil
Installation Housing Press Fit
Pressure 10 psi
Spring Type Garter
Bore Sealant Bore Tite
Operating Temperature [Max] 302 °F
Inch/Metric Inch
Lubricant Oil or Grease
Spring Material Carbon Steel
Seal Application Dirt Exclusion and Lubricant Retention
Seal Design SKF Wave
Solid Yes
Speed 0.07 ft/min
Lip Material Polyacrylate Elastomer (ACM)
Lip Style Internal
Case Material Steel
Housing Bore Dia. 4.751 in
Surface Speed [Nom] 3,600 ft/min
Misalignment & Runout (In. @ Feet Per Minute) 0.015@1000, 0.010@3600
Design CRWA1
Operating Temperature [Min] -40 °F
Construction CRWA1
Temperature Range [Min] -40 °F
Lip Type Dual Lip
Overall Width 0.375 in
Temperature Range [Max] 300 °F
Cover/Compensation Ring/Plate Required No
Case Construction Steel Case w/o Inner Case
Case Design Metal Case
Weight 0.243 LB
EAN or UPC 85311032377
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison