Find a Service Center
Alternate Products
- 3 in Shaft Diameter
- 5 in Housing Bore Diameter
- 12 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Case Design | Metal Case, Inner Case |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Type | Oil |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Housing Bore Dia. | 5.69 in |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Overall Width | 0.5 in |
| Construction | CRWH1 |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 3.875 in |
| Pressure | 10 psi |
| Weight | 0.523 LB |
| EAN or UPC | 85311033947 |
