Find a Service Center
- Radial Shaft Seal
- 45 mm Shaft Diameter
- 65 mm Housing Bore Diameter
- 7 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Seal Application | General Purpose |
| Lip Style | Internal |
| Construction | HMSA7P2 |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Seal Type | Grease |
| Case Construction | Rubber Case w/o Inner Case |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Pressure | 5 psi |
| Shaft Dia. | 45 mm |
| Lip Type | Dual Lip w/One Spring |
| Housing Bore Dia. | 65 mm |
| Seal Design | Standard |
| Overall Width | 7 mm |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Weight | 0.061 LB |
| EAN or UPC | 7316579050906 |
