Find a Service Center
Alternate Products
- 4.75 in Shaft Diameter
- 6.25 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.5 in |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Solid | Yes |
| Case Material | Steel |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Housing Bore Dia. | 6.25 in |
| Shaft Dia. | 4.75 in |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Seal Application | General Purpose |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case, Inner Case |
| Weight | 0.561 LB |
| EAN or UPC | 85311036757 |
