Find a Service Center
- Radial Shaft Seal
- 50 mm Shaft Diameter
- 72 mm Housing Bore Diameter
- 7 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Case Construction | Rubber Case w/o Inner Case |
| Lip Style | Internal |
| Construction | HMSA7P2 |
| Temperature Range [Max] | 250 °F |
| Seal Type | Grease |
| Overall Width | 7 mm |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 50 mm |
| Pressure | 5 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Seal Design | Standard |
| Lip Type | Dual Lip w/One Spring |
| Housing Bore Dia. | 72 mm |
| Lip Material | Nitrile Rubber (NBR) |
| Inch/Metric | Metric |
| Weight | 0.08 LB |
| EAN or UPC | 7316579051477 |
