Find a Service Center
Alternate Products
- 5 in Shaft Diameter
- 6 in Housing Bore Diameter
- 12 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.5 in |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Shaft Dia. | 5.25 in |
| Temperature Range [Min] | -40 °F |
| Case Design | Metal Case, Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Construction | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Housing Bore Dia. | 6.75 in |
| Case Construction | Steel Case w/Inner Case |
| Solid | Yes |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Design | CRWH1 |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Weight | 0.645 LB |
| EAN or UPC | 85311037853 |
