Find a Service Center
- Radial Shaft Seal
- 70 mm Shaft Diameter
- 100 mm Housing Bore Diameter
- 10 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Temperature Range [Min] | -22 °F |
| Lip Type | Single Lip w/Spring |
| Surface Speed [Nom] | 3,249 ft/min |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 100 mm |
| Inch/Metric | Metric |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel Garter |
| Overall Width | 10 mm |
| Temperature Range [Max] | 230 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 70 mm |
| Seal Application | General Purpose |
| Weight | 0.273 LB |
| EAN or UPC | 85311028806 |
