Find a Service Center
Alternate Products
- 0.75 in Shaft Diameter
- 1.575 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Spring Type | Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 884 ft/min |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 0.75 in |
| Housing Bore Dia. | 1.575 in |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Construction | CRW1 |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Overall Width | 0.25 in |
| Seal Application | General Purpose |
| Solid | Yes |
| Spring Material | Carbon Steel |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.075 LB |
| EAN or UPC | 85311005906 |
