Find a Service Center
- 8 in Shaft Diameter
- 9 in Housing Bore Diameter
- 0.63 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Max] | 210 °F |
| Design | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Case Construction | Steel Case w/Inner Case |
| Solid | Yes |
| Overall Width | 0.625 in |
| Shaft Dia. | 8 in |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 9 in |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Case Material | Steel |
| Case Design | Metal Case, Inner Case |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Weight | 1.06 LB |
| EAN or UPC | 85311039987 |
