Skip to content Skip to navigation menu
Nitrile Rubber Dual Lip Shaft Seal

9700

Nitrile Rubber Dual Lip Shaft Seal
Item #100746642
  • 25 mm Shaft Diameter
  • 40.54 mm Housing Bore
  • 6.35 mm Overall Width
  • Nitrile Rubber (NBR) Lip Material
  • SKF Wave Seal
Nitrile Rubber Dual Lip Shaft Seal
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 25 mm Shaft Diameter
  • 40.54 mm Housing Bore
  • 6.35 mm Overall Width
  • Nitrile Rubber (NBR) Lip Material
  • SKF Wave Seal

description

  • Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA5 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation. The seal also has a garter spring and a non-contacting auxiliary lip optimizes the sealing against the shaft.

applications

  • Engines
  • Drive axles
  • Transmissions
  • Pumps
  • Electric motors
  • Speed reducers

features

  • For oil or grease
  • With garter spring
  • WAVE lip creates higher pumping rate
  • WAVE lip has less friction between shaft and lip
  • WAVE lip has a lower temperature at the contact point
Pressure 50 psi
Seal Design SKF Wave
Lip Style Internal
Lip Type Dual Lip
Bore Sealant Bore Tite
Overall Width 6.35 mm
Case Design Metal Case
Cover/Compensation Ring/Plate Required No
Housing Bore Dia. 40.54 mm
Seal Type Oil
Shaft Dia. 25 mm
Case Material Steel
Installation Housing Press Fit
Solid Solid
Lip Material Nitrile Rubber (NBR)
Temperature Range [Min] -65 °F
Operating Temperature [Min] -40 °F
Temperature Range [Max] 225 °F
Spring Material Carbon Steel
Design CRWA5
Inch/Metric Metric
Lubricant Oil or Grease
Case Construction Steel Case w/o Inner Case
Surface Speed [Nom] 3,600 ft/min
Construction CRWA5
Misalignment & Runout (In. @ Feet Per Minute) 0.015@1000, 0.010@3600
Spring Type Garter
Seal Application General Purpose
Speed 0.35 ft/min
Material Alloy Steel
Operating Temperature [Max] 210 °F
Set Includes 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in
Size Range [Min] 3/8 in
No. of Points 12
No. of Pieces 7
No. of Teeth 72
Finish Full Polish Chrome
Size Range [Max] 3/4 in
Weight 0.073 LB
EAN or UPC 85311007634
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison