Find a Service Center
Alternate Products
- Cam Follower
- 3 1/2" OD V-Groove Roller
- 7/8" Standard Stud
- 7/8-14 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Inch/Metric | Inch |
| Roller Dia. | 3.500 in |
| Threads per Inch | 14 |
| Roller Type | V Groove |
| Thread Type | UNF |
| Bearing Type | Ball Bearing |
| End Type | Metal Plug |
| Stud Dia. | 0.875 in |
| Material | Steel |
| Enclosure | Sealed |
| Stud Type | Standard |
| Dynamic Load Rating | 3490 lbf |
| Roller Width | 1.6875 in |
| Thread Size | 7/8 |
| Stud Length | 2 in |
| Weight | 3.4 LB |
| EAN or UPC | 651041149359 |
