Find a Service Center
Alternate Products
- 0.876 in Inner Diameter
- 2.047 in Outer Diameter
- Single Row
- 1 in Overall Width
- 2 Seals
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Outer Ring Width | 0.591 in |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Capacity | Standard Capacity |
| Seal Material | Rubber |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Material | Steel |
| Contact Angle | 0° |
| Origin | Wide Inner Ring |
| Static Load Rating [Max] | 1560 lbf |
| Preload Level | None |
| Ball Dia. | 0.313 in |
| No. of Balls | 9 |
| Relubricatable | No |
| Dynamic Load Rating | 3450 lbf |
| Ball Material | Steel |
| Closure Type | 2 Seals |
| Locking Device | No Locking Device |
| O.D. | 2.04724 in |
| Overall Width | 1 in, 25.4 mm |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| O.D. Type | Spherical |
| Cage Material | Steel |
| Rolling Element Material | Steel |
| Fillet Radius Cone | 0.039 in, 0.99 mm |
| Precision Class | ISO P0 |
| I.D. | 7/8 in |
| Bearing Type | Radial |
| Internal Clearance | C0 |
| Temperature Range [Min] | -30 °F |
| Precision | Standard |
| Bearing Material | Steel |
| Bore Type | Hex Bore |
| Snap Ring | No Snap Ring |
| Rolling Element | Ball |
| Inch/Metric | Inch Bore |
| No. of Rows | 1 |
| Inner Ring Width | 1 in |
| Seal Type | Contact Seals |
| Rows of Balls | Single |
| Weight | 0.441 LB |
| EAN or UPC | 87796045972 |
