Find a Service Center
Alternate Products
- 0.669 in Inner Diameter
- 1.575 in Outer Diameter
- Single Row
- 0.472 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Static Load Rating [Max] | 1560 lbf |
| Relubricatable | No |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Cage Type | Plastic |
| No. of Rows | 1 |
| Overall Width | 0.472 in, 12 mm |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| Inner Ring Width | 12 mm |
| Bore Type | Round Bore |
| Seal Type | Unsealed |
| Rolling Element Material | Steel |
| O.D. | 40 mm |
| O.D. Type | Straight |
| Origin | Single Row Angular Contact |
| Dynamic Load Rating | 3200 lbf |
| I.D. | 17 mm |
| Ball Material | Steel |
| Outer Ring Width | 12 mm |
| Closure Type | Open |
| Preload Level | None |
| Inch/Metric | Metric Bore |
| Contact Angle | 20° |
| Enclosure | Open |
| Fillet Radius | 0.024 in |
| Seal Material | None |
| Cage Material | Nylon |
| Precision Level | Standard (ABEC 1) |
| Universally (Flush) Ground | No |
| Locking Device | No Locking Device |
| Rolling Element | Ball |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Filling Slot | No |
| Radial Internal Clearance | C3 |
| Bearing Material | Steel |
| Precision | Standard |
| Capacity | Standard Capacity |
| icNumber | 7695890 |
| Bearing Type | Angular Contact |
| Snap Ring | No Snap Ring |
| Material | Steel |
| Precision Class | ISO P0 |
| Lubricant | Oil Preservative |
| Weight | 0.15 LB |
| EAN or UPC | 87796046443 |
| NSN Number | 3110-00-516-5699 |
