Find a Service Center
Alternate Products
- 2.362 in Inner Diameter
- 4.331 in Outer Diameter
- Single Row
- 0.866 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| I.D. | 60 mm |
| Precision | Standard |
| Seal Material | None |
| Bore Type | Round Bore |
| Rows of Balls | Single |
| Filling Slot | No |
| Bearing Type | Angular Contact |
| Dynamic Load Rating | 14300 lbf |
| Preload Level | None |
| No. of Rows | 1 |
| Enclosure | Open |
| Closure Type | Open |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Cage Type | Metal |
| Rolling Element Material | Steel |
| Inch/Metric | Metric Bore |
| Inner Ring Width | 22 mm |
| Contact Angle | 40° |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| Outer Ring Width | 22 mm |
| Universally (Flush) Ground | Yes |
| Fillet Radius | 0.059 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| icNumber | 7695825 |
| Overall Width | 0.866 in, 22 mm |
| Lubricant | Oil Preservative |
| Bearing Material | Steel |
| Rolling Element | Ball |
| No. in Set | Single Bearing |
| Seal Type | Unsealed |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| Origin | Single Row Angular Contact |
| Static Load Rating [Max] | 10000 lbf |
| Precision Class | ISO P0 |
| O.D. Type | Straight |
| Internal Design | Universal Mounting |
| O.D. | 110 mm |
| Relubricatable | No |
| Cage Material | Brass/Bronze |
| Capacity | Standard Capacity |
| Weight | 0.0 LB |
| EAN or UPC | 87796044104 |
