Find a Service Center
Alternate Products
NSK Corp.
7220BMPC
72 Series 100 mm I.D Single Row Angular Contact Type Ball Bearing
Item #101517565
- Single Row Angular Contact Bearing, 100 mm ID x 180 mm OD x 34 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Dynamic Load Rating | 33500 lbf |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Material | Brass/Bronze |
| Inner Ring Width | 34 mm |
| Locking Device | No Locking Device |
| Preload Level | None |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Fillet Radius | 0.079 in |
| O.D. | 180 mm |
| Inch/Metric | Metric Bore |
| Precision | Standard |
| Seal Type | Unsealed |
| Enclosure | Open |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| Radial Internal Clearance | C3 |
| Cage Type | Metal |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Lubricant | Oil Preservative |
| Precision Level | Standard (ABEC 1) |
| I.D. | 100 mm |
| Bearing Type | Angular Contact |
| No. in Set | Single Bearing |
| Contact Angle | 40° |
| Origin | Single Row Angular Contact |
| Ball Material | Steel |
| icNumber | 7695860 |
| Seal Material | None |
| Outer Ring Width | 34 mm |
| Static Load Rating [Max] | 25500 lbf |
| Weight | 7.62 LB |
| EAN or UPC | 87796074286 |
