Find a Service Center
Alternate Products
NSK Corp.
7222BMPC
72 Series 110 mm I.D Single Row Angular Contact Type Ball Bearing
Item #101517810
- 4.33 in Inner Diameter
- 7.874 in Outer Diameter
- Single Row
- 1.496 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Material | Steel |
| No. of Rows | 1 |
| Relubricatable | No |
| I.D. | 110 mm |
| Seal Material | None |
| Contact Angle | 40° |
| Fillet Radius Cone | 0.083 in, 2.11 mm |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Rolling Element | Ball |
| Radial Internal Clearance | C3 |
| icNumber | 7695923 |
| Capacity | Standard Capacity |
| Rolling Element Material | Steel |
| Static Load Rating [Max] | 32500 lbf |
| Outer Ring Width | 38 mm |
| Closure Type | Open |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| Bearing Type | Angular Contact |
| Bore Type | Round Bore |
| Filling Slot | No |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius | 0.079 in |
| Locking Device | No Locking Device |
| Inner Ring Width | 38 mm |
| O.D. | 200 mm |
| Dynamic Load Rating | 39000 lbf |
| Origin | Single Row Angular Contact |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Internal Design | Universal Mounting |
| Overall Width | 1.496 in, 38 mm |
| Rows of Balls | Single |
| Precision Class | ISO P0 |
| Cage Material | Brass/Bronze |
| Inch/Metric | Metric Bore |
| Bearing Material | Steel |
| Enclosure | Open |
| Precision | Standard |
| O.D. Type | Straight |
| Cage Type | Metal |
| Ball Material | Steel |
| Universally (Flush) Ground | Yes |
| Weight | 11.38 LB |
| EAN or UPC | 87796074309 |
