Find a Service Center
Alternate Products
- 2.6875" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Collar No. | SO211K |
| Mounted Unit Duty | Heavy-Duty |
| Series | RSAO Series |
| Length Through Bore | 3.5 in |
| Bearing Type | Ball Bearing |
| Housing Height | 8 9/32 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 12 in |
| Bolt Size | 7/8 in |
| Collar O.D. | 4 in |
| Bolt Hole Length | 1 in |
| Shaft Dia. | 2.6875 in |
| Bearing Insert | GN211KRRB |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Cast Iron |
| Base Height | 1 3/4 in |
| Base Length | 15 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 1 3/8 in |
| Seal Type | Contact Seals |
| Overall Width | 4 3/8 in |
| End Type | Open End |
| Insert Type | Steel Insert |
| Base Width | 4 3/8 in |
| Bolt Holes | 2 |
| Housing Width | 7 7/16 in |
| Inch/Metric | Inch Bore |
| Bearing Design | Non-Expansion |
| Weight | 41.948 LB |
| EAN or UPC | 87796061828 |
