Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Length Through Bore | 1 11/32 in |
| Hub Length | 29/64 in |
| Flange Length | 19/32 in |
| RPM [Max] | 7600 rpm |
| Set Screw Size | 5/16-18 UNC |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Size | 5 |
| Compatible Bore Size [Min] | 1/2 in |
| Flange Diameter | 3.25 in |
| Hub Dia. | 1 7/8 in |
| Hub Type | Shaft Hub |
| Angular Misalignment [Max] | 1° |
| O.D. | 3 1/4 in |
| Compatible Bore Size [Max] | 1 1/4 in |
| Bore Dia. | 1 3/16 in |
| Keyseat | 1/4 in x 1/8 in |
| Set Screw Location | Oneover K Sand 90° |
| Bore Type | Finished with Keyway |
| Material | Sintered Carbon Steel |
| Weight | 1.3 LB |
| EAN or UPC | 698672640107 |
