Find a Service Center
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Material | High Strength Cast Iron |
| Hub Length | 1 9/32 in |
| Bore Size Tolerance | +.0005 to +.0020 in |
| Hub Dia. | 5 3/4 in |
| Compatible Bore Size [Max] | 3 15/16 in |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Hub Type | Shaft Hub |
| Flange Length | 1 11/16 in |
| Keyseat | 7/8 in x 7/16 in |
| Bore Dia. | 3 5/8 in |
| Length Through Bore | 4 in |
| Compatible Bore Size [Min] | 7/8 in |
| Set Screw Location | Oneover K Sand 90° |
| Flange Diameter | 10 in |
| Bore Type | Finished with Keyway |
| Size | 12 |
| Set Screw Size | 3/4-10 UNC |
| O.D. | 10 in |
| RPM [Max] | 2800 rpm |
| Weight | 24.1 LB |
| EAN or UPC | 698672002370 |
