Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Set Screw Size | 1/2-13 UNC |
| O.D. | 10 in |
| Material | High Strength Cast Iron |
| Hub Type | Shaft Hub |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Flange Length | 1 11/16 in |
| Flange Diameter | 10 in |
| Set Screw Location | Oneover K Sand 90° |
| Bore Dia. | 1 1/2 in |
| Hub Length | 1 9/32 in |
| Length Through Bore | 4 in |
| Hub Dia. | 5 3/4 in |
| Compatible Bore Size [Min] | 7/8 in |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Compatible Bore Size [Max] | 3 15/16 in |
| Bore Type | Finished Bore |
| RPM [Max] | 2800 rpm |
| Size | 12 |
| Weight | 34.4 LB |
| EAN or UPC | 698672641180 |
