Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
applications
- Applications In Motors, Pumps, Compressors, Blowers, Mixers and Conveyors
| Bore Dia. | 1 1/2 in |
| Set Screw Location | Oneover K Sand 90° |
| Compatible Bore Size [Max] | 2 7/8 in |
| Hub Length | 25/32 in |
| Keyseat | 3/8 in x 3/16 in |
| Size | 9 |
| Set Screw Size | 3/8-16 UNC |
| Flange Length | 1 1/32 in |
| Flange Diameter | 6.35 in |
| Hub Type | Shaft Hub |
| Length Through Bore | 2 13/32 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| RPM [Max] | 3750 rpm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Bore Type | Finished with Keyway |
| O.D. | 6 7/20 in |
| Compatible Bore Size [Min] | 7/16 in |
| Material | High Strength Cast Iron |
| Hub Dia. | 3 5/8 in |
| Weight | 8.3 LB |
| EAN or UPC | 698672640701 |
