Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Compatible Bore Size [Min] | 7/16 in |
| Size | 9 |
| Set Screw Size | 3/8-16 UNC |
| Keyseat | 1/2 in x 1/4 in |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Material | High Strength Cast Iron |
| RPM [Max] | 3750 rpm |
| Bore Type | Finished with Keyway |
| Bore Dia. | 1 15/16 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Flange Diameter | 6.35 in |
| Flange Length | 1 1/32 in |
| Set Screw Location | Oneover K Sand 90° |
| Compatible Bore Size [Max] | 2 7/8 in |
| Hub Length | 25/32 in |
| O.D. | 6 7/20 in |
| Length Through Bore | 2 13/32 in |
| Hub Dia. | 3 5/8 in |
| Hub Type | Shaft Hub |
| Weight | 7.5 LB |
| EAN or UPC | 698672640763 |
