Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
applications
- Applications In Motors, Pumps, Compressors, Blowers, Mixers and Conveyors
| Set Screw Size | 3/8-16 UNC |
| Bore Dia. | 1 3/8 in |
| Flange Diameter | 6.35 in |
| Hub Type | Shaft Hub |
| O.D. | 6 7/20 in |
| RPM [Max] | 3750 rpm |
| Keyseat | 5/16 in x 5/32 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Material | High Strength Cast Iron |
| Length Through Bore | 2 13/32 in |
| Compatible Bore Size [Min] | 7/16 in |
| Size | 9 |
| Set Screw Location | Oneover K Sand 90° |
| Flange Length | 1 1/32 in |
| Bore Type | Finished with Keyway |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Hub Dia. | 3 5/8 in |
| Hub Length | 25/32 in |
| Compatible Bore Size [Max] | 2 7/8 in |
| Weight | 8.5 LB |
| EAN or UPC | 698672640688 |
