Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
applications
- Applications In Motors, Pumps, Compressors, Blowers, Mixers and Conveyors
| Hub Dia. | 3 5/8 in |
| Length Through Bore | 2 13/32 in |
| Material | High Strength Cast Iron |
| Keyseat | 1/2 in x 1/4 in |
| RPM [Max] | 3750 rpm |
| Set Screw Location | Oneover K Sand 90° |
| Bore Dia. | 1 7/8 in |
| Size | 9 |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Compatible Bore Size [Max] | 2 7/8 in |
| O.D. | 6 7/20 in |
| Flange Diameter | 6.35 in |
| Hub Type | Shaft Hub |
| Bore Type | Finished with Keyway |
| Set Screw Size | 3/8-16 UNC |
| Flange Length | 1 1/32 in |
| Compatible Bore Size [Min] | 7/16 in |
| Hub Length | 25/32 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Weight | 7.7 LB |
| EAN or UPC | 698672640756 |
