Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Compatible Bore Size [Min] | 7/16 in |
| Compatible Bore Size [Max] | 2 7/8 in |
| Flange Length | 1 1/32 in |
| O.D. | 6 7/20 in |
| Bore Dia. | 1 9/16 in |
| Size | 9 |
| Flange Diameter | 6.35 in |
| RPM [Max] | 3750 rpm |
| Hub Dia. | 3 5/8 in |
| Bore Type | Finished with Keyway |
| Keyseat | 3/8 in x 3/16 in |
| Hub Type | Shaft Hub |
| Hub Length | 25/32 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Material | High Strength Cast Iron |
| Set Screw Size | 3/8-16 UNC |
| Set Screw Location | Oneover K Sand 90° |
| Length Through Bore | 2 13/32 in |
| Weight | 8.2 LB |
| EAN or UPC | 698672640718 |
