Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| RPM [Max] | 3750 rpm |
| Bore Type | Finished with Keyway |
| Bore Dia. | 2 7/8 in |
| Compatible Bore Size [Max] | 2 7/8 in |
| Hub Type | Shaft Hub |
| Material | High Strength Cast Iron |
| Set Screw Location | Oneover K Sand 90° |
| Flange Diameter | 6.35 in |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Keyseat | 3/4 in x 1/8 in |
| Length Through Bore | 2 9/32 in |
| Bore Size Tolerance | +.0005 to +.0020 in |
| Compatible Bore Size [Min] | 7/16 in |
| Flange Length | 1 1/32 in |
| Hub Dia. | 4 1/8 in |
| Hub Length | 1 1/4 in |
| O.D. | 6 7/20 in |
| Set Screw Size | 3/8-16 UNC |
| Size | 9 |
| Weight | 5.4 LB |
| EAN or UPC | 698672640824 |
