Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Bore Size Tolerance | +.025 to +.050 mm |
| Hub Length | 20 mm |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| Bore Dia. | 32 mm |
| Set Screw Location | Oneover K Sand 90° |
| Keyseat | 10 mm x 3.3 mm |
| O.D. | 161 mm |
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| Hub Type | Shaft Hub |
| Set Screw Size | M10x1.5 |
| Flange Diameter | 6.35 in |
| Flange Length | 26 mm |
| RPM [Max] | 3750 rpm |
| Size | 9 |
| Length Through Bore | 61 mm |
| Material | High Strength Cast Iron |
| Bore Type | Finished with Keyway |
| Hub Dia. | 98 mm |
| Weight | 8.6 LB |
| EAN or UPC | 698672645522 |
