Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Hub Length | 20 mm |
| Hub Dia. | 98 mm |
| Hub Type | Shaft Hub |
| Length Through Bore | 61 mm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Flange Length | 26 mm |
| Set Screw Location | Oneover K Sand 90° |
| O.D. | 161 mm |
| Bore Dia. | 38 mm |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| Material | High Strength Cast Iron |
| Size | 9 |
| Flange Diameter | 6.35 in |
| Set Screw Size | M10x1.5 |
| Bore Type | Finished with Keyway |
| RPM [Max] | 3750 rpm |
| Keyseat | 10 mm x 3.3 mm |
| Bore Size Tolerance | +.025 to +.050 mm |
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| Weight | 8.3 LB |
| EAN or UPC | 698672645539 |
