Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| Set Screw Location | Oneover K Sand 90° |
| Hub Type | Shaft Hub |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| RPM [Max] | 3750 rpm |
| Length Through Bore | 61 mm |
| Bore Size Tolerance | +.025 to +.050 mm |
| Hub Dia. | 98 mm |
| Bore Type | Finished with Keyway |
| Size | 9 |
| Keyseat | 12 mm x 3.3 mm |
| Flange Length | 26 mm |
| Material | High Strength Cast Iron |
| O.D. | 161 mm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Flange Diameter | 6.35 in |
| Set Screw Size | M10x1.5 |
| Bore Dia. | 42 mm |
| Hub Length | 20 mm |
| Weight | 8.0 LB |
| EAN or UPC | 698672645546 |
