Find a Service Center
Boston Gear
F724-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809818
- 3 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 7/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Input Power Rating | 3.18 hp, 2.371 kW |
| Standard | AGMA Service Class I |
| Rated Efficiency | 93% |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Output Speed | 175 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Family Name | F |
| Reduction Type | Single |
| Box Length | 6 3/8 in |
| Fan Cooled | No |
| Series | 700 |
| Center Distance Code | 724 |
| Motor Application | General Purpose |
| Output Shaft Projection | Solid Left Output |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Box Width | 5 7/16 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input HP @ RPM | 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm |
| Box Height | 6 15/16 in |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.27 hp |
| Output Bore Shaft Dia. | 1.125 in |
| Center Distance | 2.375 in |
| Ratio | 10:1 |
| Torque Out @ 1750 rpm | 1069 in lb |
| Input Configuration | C-Face Quilled |
| Output Torque @ RPM | 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm |
| Torque Out @ 1150 rpm | 1025 in lb |
| Media Mapping Output | G |
| Shaft Assembly Code | G |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 175 rpm |
| HP @ RPM | 3 hp @ 1800 rpm |
| Washdown Duty | No |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque | 1069 lb-in |
| Output Configuration | Left Output |
| Worm Position | Universal |
| Input Motor HP | 3 |
| Lubrication | None |
| Bolt Center | 5 in x 2 7/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Frame | 140TC, 180C |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Frame Size | 140TC, 180C |
| Output Shaft | Solid |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Style | Right Angle |
| Motor Frame Size | B7140TC180C |
| Motor HP | 2 hp |
| Use With | 724 |
| Media Mapping Style | F |
| Bore Code | B7 |
| Weight | 30.1 LB |
| EAN or UPC | 781711519844 |
