Find a Service Center
Alternate Products
- 8 Diametral Pitch
- 14.5⁰ Pressure Angle
- 160 Teeths
- Cast Iron Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Rated Torque [Max] | 3828 @ 100 rpm |
| Torque at 900 RPM | N/A |
| Torque at 1200 RPM | N/A |
| Material | Cast Iron |
| Length Through Bore | 2.375 in |
| O.D. | 20.25 in |
| Origin | Reborable |
| No. of Teeth | 160 |
| Face Width | 1.25 in |
| Torque at 600 RPM | N/A |
| Keyway | w/o Keyway, w/o Setscrew |
| Bore Size | 1.125 in |
| Outside Dia. | 20.25 in |
| Hub Dia. | 3.25 in |
| Torque at 1800 RPM | N/A |
| Pitch Diameter | 20 in |
| No. of Teeths | 160 |
| Type | D |
| Set Screw | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | N/A |
| Diametral Pitch | 8 |
| Torque at 200 RPM | 2610 lb/in |
| Hub Projection | 1 1/4 in |
| Bore Dia. | 1.25 in |
| Outside Dia. [Min] | 20.25 in |
| Pressure Angle | 14 1/2 degrees |
| Pitch Dia. | 20 in |
| Bore Type | Minimum Plain Bore |
| Torque at 300 RPM | N/A |
| Weight | 31.201 LB |
| EAN or UPC | 781711104125 |
