Find a Service Center
Alternate Products
- 1.594 in Shaft Diameter
- 2.125 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Polyacrylate Elastomer (ACM) |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Design | CRW1 |
| Case Design | Metal Case |
| Shaft Dia. | 1.594 in |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 1,879 ft/min |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 300 °F |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 2.125 in |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 302 °F |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Weight | 0.081 LB |
| EAN or UPC | 85311016421 |
