Find a Service Center
- Radial Shaft Seal
- 20 mm Shaft Diameter
- 32 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Spring Material | Carbon Steel Garter |
| Seal Type | Grease |
| Housing Bore Dia. | 32 mm |
| Seal Application | General Purpose |
| Shaft Dia. | 20 mm |
| Lip Type | Single Lip w/Spring |
| Case Construction | Rubber Covered Steel Case |
| Seal Design | Standard |
| Temperature Range [Min] | -40 °F |
| Overall Width | 8 mm |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Construction | HMS4 |
| Temperature Range [Max] | 250 °F |
| Weight | 0.07 LB |
| EAN or UPC | 85311238434 |
