Find a Service Center
- Radial Shaft Seal
- 30 mm Shaft Diameter
- 60 mm Housing Bore Diameter
- 10 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Max] | 250 °F |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Construction | HMS4 |
| Spring Material | Carbon Steel Garter |
| Overall Width | 10 mm |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Lip Type | Single Lip w/Spring |
| Seal Type | Grease |
| Seal Design | Standard |
| Seal Application | General Purpose |
| Housing Bore Dia. | 60 mm |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 30 mm |
| Case Construction | Rubber Covered Steel Case |
| Inch/Metric | Metric |
| Weight | 0.119 LB |
| EAN or UPC | 85311236478 |
