Find a Service Center
- 1.125 in Shaft Diameter
- 1.630 in Housing Bore Diameter
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
caution
- Not generally for oil retention
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | Molded Design |
| Shaft Dia. | 1 in, 28 mm |
| Lip Type | Single Lip |
| Construction | HMS4N |
| Inch/Metric | Metric |
| Design | HMS4N |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 1 in, 41 mm |
| Temperature Range [Max] | 250 °F |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Rubber Outside Diameter |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Overall Width | 7 mm |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.076 LB |
| EAN or UPC | 85311009560 |
