Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flow Rate | 57 lpm |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Design Code | 9 |
| Case Drain Code | 0 |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mounting Holes | 3/8-16 |
| Output Shaft Type | Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Displacement | 74 cm3/Rev |
| Duty | Standard-Duty |
| Port Size | 1/2-14 |
| Series | H Series |
| Torque | 118 Nm |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 4 Bolt |
| Paint | Primer Low Gloss Black |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 760 rpm |
| Material | Cast Iron |
| Brake Type | Hydraulic |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Seal Options | Standard |
| Recommended System Working Temperature [Min] | -30 °F |
| Flow [Max] | 15 gal/min |
| Front Seal Kit If Available | 60540-000 |
| RPM [Max] | 760 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Intermittent Pressure [Max] | 165 bar |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | B |
| Case Drain | None |
| Splines | 0 |
| Port Type | NPTF |
| Pilot Diameter | 1.75 in |
| Port Code | B |
| Displacement (in³/rev) | 4.52 |
| Output Shaft Code | 01 |
| Weight | 11.25 LB |
