Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Intermittent Pressure [Max] | 165 bar |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Port Size | 1/2-14 |
| Flange Orientation | Standard |
| Output Shaft Type | Straight |
| Port Code | B |
| Recommended System Working Temperature [Min] | -30 °F |
| Case Drain | None |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Design Code | 9 |
| Paint Code | A |
| Seal Options | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 01 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Displacement | 74 cm3/Rev |
| Seal Material | Buna-N |
| Brake Type | Hydraulic |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Torque | 118 Nm |
| Corrosion Resistant | No |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flow [Max] | 15 gal/min |
| Recommended System Working Temperature [Max] | 180 °F |
| Duty | Standard-Duty |
| Front Seal Kit If Available | 60540-000 |
| Mounting Type Code | B |
| RPM [Max] | 760 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 57 lpm |
| Paint | Primer Low Gloss Black |
| Material | Cast Iron |
| Series | H Series |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Displacement (in³/rev) | 4.52 |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Weight | 11.25 LB |
