Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Flow [Max] | 15 gal/min |
| Seal Options | Standard |
| Torque | 233 Nm |
| Output Shaft Code | 01 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Paint Code | A |
| Case Drain Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Series | H Series |
| Seal Material | Buna-N |
| Front Seal Kit If Available | 60540-000 |
| Displacement (in³/rev) | 9.7 |
| Mounting Type Code | B |
| Duty | Standard-Duty |
| Port Code | A |
| Paint | Primer Low Gloss Black |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Pressure [Max] | 1650 psi |
| Corrosion Resistant | No |
| Mounting Holes | 3/8-16 |
| Displacement | 159 cm3/Rev |
| Recommended System Working Temperature [Max] | 180 °F |
| Rotation | Standard Rotation |
| RPM [Max] | 353 rpm |
| Port Size & Location | SAE-10 Side |
| Port Type | SAE O-Ring |
| Special Features Assembly Code | 0 |
| Output Shaft Type | Straight |
| Pilot Diameter | 1.75 in |
| RPM [Min] | 353 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Recommended System Working Temperature [Min] | -30 °F |
| Design Code | 9 |
| Mount Type | 4 Bolt |
| Shaft Type | Straight w/ Woodruff Key |
| Intermittent Pressure [Max] | 155 bar |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size | 7/8-14 |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 57 lpm |
| Flange Orientation | Standard |
| Brake Type | Hydraulic |
| Special Features Hardware Code | 00 |
| Weight | 12.1 LB |
