Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Motor Element | Gerotor |
| Port Location | Side Port |
| Special Features Hardware Code | 00 |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Code | 01 |
| Front Seal Kit If Available | 60540-000 |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Design Code | 9 |
| Port Type | SAE O-Ring |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Seal Options | Standard |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Port Size & Location | SAE-10 Side |
| Paint | Primer Low Gloss Black |
| Torque | 233 Nm |
| Flow Rate | 57 lpm |
| Mounting Type Code | B |
| Brake Type | Hydraulic |
| Motor Type | Spool Valve |
| Intermittent Pressure [Max] | 155 bar |
| RPM [Min] | 353 rpm |
| Recommended System Working Temperature [Max] | 180 °F |
| Displacement (in³/rev) | 9.7 |
| Splines | 0 |
| Pilot Diameter | 1.75 in |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Port Code | A |
| Mounting Holes | 3/8-16 |
| Displacement | 159 cm3/Rev |
| Rotation | Standard Rotation |
| Port Size | 7/8-14 |
| Pressure [Max] | 1650 psi |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Mount Type | 4 Bolt |
| RPM [Max] | 353 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Series | H Series |
| Seal Material | Buna-N |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Recommended System Working Temperature [Min] | -30 °F |
| Special Features Assembly Code | 0 |
| Output Shaft Type | Straight |
| Weight | 12.1 LB |
